FREE DTF ARTWORK TOOL
DTF Image Quality Checker
Use our free DTF image quality checker to see whether your artwork is ready to print at the size you need. Check resolution, effective DPI, transparency, and recommended print size before ordering your DTF transfer.
Your artwork is analyzed directly in your browser. It is not uploaded or submitted as an order.
Drag & drop your image here
or browse to upload
Image Information
Physical Size at Standard DPIs
| DPI | Use Case | Print Size | Quality |
|---|
How to Read Your Image Quality Results
300+ DPI
Excellent
Ideal for high-quality DTF printing. Artwork at 300 DPI or higher should retain sharp edges, small details, and clean text at the selected print size.
200–299 DPI
Good
Suitable for most DTF transfers. The artwork should print well, although extremely fine details or very small text may not be as crisp as they would be at 300 DPI.
150–199 DPI
Use With Caution
The artwork may still be usable, especially for smaller or less detailed designs, but enlarging it further can cause softer edges and visible loss of detail.
Below 150 DPI
Low Resolution
This artwork is likely to appear blurry or pixelated at the selected print size. A higher-resolution version of the original artwork is recommended before printing.
Why does print size matter?
DPI changes as artwork is resized. A file that is 300 DPI at 5 inches wide may no longer be 300 DPI if it is enlarged to 10 inches wide. That is why the Earthline Customs Image Quality Checker calculates effective DPI at your intended print size instead of relying only on the DPI number stored inside the file.
What Makes Artwork DTF-Ready?
The best DTF results start with clean, high-quality artwork prepared at the size you actually plan to print. Before ordering, check these four things.
High-Resolution Artwork
Start with the highest-quality version of your design available. Aim for 300 DPI at the intended print size whenever possible.
Transparent Background
If you do not want a background printed around your design, use artwork with a transparent background. PNG files are commonly used for this purpose.
Correct Print Size
Check your artwork at the actual size you plan to order. Enlarging an image lowers its effective DPI and can reduce print quality.
Use the Original File
Whenever possible, upload the original artwork instead of a screenshot, social media image, or image saved from a website. Those files are often compressed or too small for quality printing.
Common Artwork Problems
Even good artwork can run into problems when it is resized or prepared for printing. Here are some of the most common issues to check before submitting your DTF order.
Why does my artwork look blurry or pixelated?
Blurry or pixelated artwork usually means the image does not contain enough pixels for the size you are trying to print. Enlarging a small image spreads those pixels over a larger area and lowers the effective DPI. Whenever possible, use a higher-resolution original file or print the artwork at a smaller size.
Why is there a white or colored box around my design?
The background is most likely part of the image file. If you do not want that background printed, your artwork should have a transparent background. A PNG with transparency is commonly used for DTF artwork. If the background is intentionally part of the design, it can remain.
Can I use a screenshot for a DTF transfer?
Screenshots are usually not the best source for print artwork. They may be compressed, cropped, or much smaller than the original design. For the best result, use the original artwork file whenever possible. If a screenshot is your only option, check it with the Image Quality Checker at your intended print size before ordering.
Why did my DPI drop when I made the image larger?
Your image contains a fixed number of pixels. When those pixels are spread across a larger print area, the effective DPI decreases. The same artwork may be excellent at 5 inches wide but low resolution at 12 inches wide. Use the Print Size Calculator above to check the DPI at the exact size you plan to order.
My file says 72 DPI. Does that mean it is too low resolution?
Not necessarily. The DPI stored inside an image file is often only metadata and does not tell the whole story. Pixel dimensions and the intended print size are more important. Use the Image Quality Checker to calculate the effective DPI at the size you actually want to print.
Can a low-resolution image be fixed by changing it to 300 DPI?
Simply changing the DPI number does not add missing image detail. If the original file does not contain enough pixels, changing its DPI setting alone will not make it truly high resolution. A larger original file or properly recreated artwork may be needed.
Need Help With Your Artwork?
Not every file is print-ready right out of the gate. If your artwork is low resolution, has an unwanted background, or you are unsure whether it will print cleanly, Earthline Customs can help you figure out the next step.
Review our artwork requirements for tips on preparing your file, or contact us if you need help before placing your order.
Ready to Print?
If your artwork looks good at the size you need and passes the quality check, you’re ready to order. Choose the option that fits your project and send us your artwork for printing.
Need individual custom transfers? Upload your design and choose your size. Building a larger order or multiple designs? Use the Gang Sheet Builder to arrange everything in one place.
Already have a completed gang sheet? Upload Your Finished Gang Sheet