DTF TRANSFER HELP

DTF Transfer Application & Care Instructions

Earthline Customs DTF transfers are printed on hot peel film and arrive ready to press. Use the instructions below as the recommended starting settings for application and garment care.

QUICK PRESS GUIDE

Hot Peel Application

300°F Temperature
Heavy Pressure
15 sec Initial Press
Hot Peel Peel While Hot
8–10 sec Repress

STEP-BY-STEP

How to Apply Your DTF Transfer

For best results, apply your transfer with a heat press.

  1. 1

    Set Your Heat Press

    Set the temperature to 300°F and use heavy pressure.

  2. 2

    Position the Transfer

    Place the DTF transfer in the desired position on your garment with the printed design facing the fabric.

  3. 3

    Cover the Transfer

    Cover the transfer with a Teflon sheet before pressing.

  4. 4

    Press for 15 Seconds

    Press at 300°F with heavy pressure for 15 seconds.

  5. 5

    Peel While Hot

    Earthline DTF transfers use hot peel film. Remove the carrier film while the transfer is still hot.

  6. 6

    Cover Again

    Cover the applied design with parchment paper, butcher paper, or a Teflon sheet.

  7. 7

    Repress for 8–10 Seconds

    Repress the design for 8–10 seconds to finish the application.

AFTER APPLICATION

Washing & Care Instructions

Proper garment care helps keep your finished design looking its best.

DO

Recommended Care

  • Turn the garment inside out.
  • Machine wash in cold water.
  • Tumble dry on low heat or hang dry.
DO NOT

Avoid These

  • Do not bleach.
  • Do not dry clean.
  • Do not iron directly over the design.

PLEASE READ

Important Application Notes

Heat Presses Can Vary

These instructions are Earthline Customs' recommended starting settings. Heat presses, garments, and materials can vary, so minor adjustments may occasionally be necessary depending on your equipment and material.

Use a Heat Press

For the most consistent pressure and temperature, we recommend applying DTF transfers with a heat press.

Check Before Pressing

Confirm your transfer placement, garment compatibility, temperature, pressure, and press time before applying the transfer.

Application Disclaimer: Earthline Customs is not responsible for transfers damaged due to incorrect temperature, pressure, application, washing, or garment incompatibility.

NEED HELP?

Have a Question Before You Press?

If you are unsure about your transfer or application before pressing, contact Earthline Customs before applying it. It is considerably easier to answer a question before 300 degrees gets involved.

Contact Earthline Customs